Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Changing Canbus Gateway the easy way  (Read 1283 times)

Offline RetroRaz

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 194
  • Posts: 2821
    • Email
Changing Canbus Gateway the easy way
« on: November 05, 2013, 11:42:26 am »
Hi all.

Ive changed a canbus gateway before and it is a pain in the rear end to get to!

I remember reading a thread somewhere that the gateway can be accessed from near the wiper motor and is much more easier to access.

Does anyone know where I can find that guide?

ALSO

when recoding it with VCDS, do I just need to tick the boxes in the installation list or open each controller and duplicate every single box from my old canbus?

Been a while and I forgot lol
Logged

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2775
Re: Changing Canbus Gateway the easy way
« Reply #1 on: November 05, 2013, 07:29:29 pm »
This is part one it

http://www.my-gti.com/2296/

Will come back with part two if yours is 07 for install via the engine compartment.
Logged

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2775
Re: Changing Canbus Gateway the easy way
« Reply #2 on: November 05, 2013, 07:41:16 pm »
Logged

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Re: Changing Canbus Gateway the easy way
« Reply #3 on: November 05, 2013, 07:42:31 pm »
I've got it done to about 10 minutes now. Did three over the weekend and apart from some cuts on my hand i find the best approach is to go in from behind the coin tray.
« Last Edit: November 09, 2013, 12:34:52 pm by Degudodger »
Logged
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!

Offline RetroRaz

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 194
  • Posts: 2821
    • Email
Re: Re: Changing Canbus Gateway the easy way
« Reply #4 on: November 05, 2013, 07:43:28 pm »
Hi buddy

I had a look at that link but its a different one which showed for an 05 that it can be accessed from the engine bay near the wiper motor.

Sent from my GT-I9300 using Tapatalk 2
Logged

Offline RetroRaz

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 194
  • Posts: 2821
    • Email
Re: Re: Changing Canbus Gateway the easy way
« Reply #5 on: November 05, 2013, 07:44:54 pm »
Ahaa! The one one r32 club. Thats the one ive been looking for. Thanks mate

Sent from my GT-I9300 using Tapatalk 2
Logged

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2775
Re: Changing Canbus Gateway the easy way
« Reply #6 on: November 05, 2013, 07:45:53 pm »
 The R32 link shows what your after via the engine bay removing wipers etc.
Logged

Offline RetroRaz

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 194
  • Posts: 2821
    • Email
Re: Re: Changing Canbus Gateway the easy way
« Reply #7 on: November 10, 2013, 11:39:14 am »
Wow! Took me 20 minutes to take out the gateway today! The last time I did it and it took hours!

Took the driver seat out so I can lie down straight in the car and look up the clutch pedal.

All coded up and hopefully no more battery drain.

Thanks to everyone for their help.

Sent from my GT-I9300 using Tapatalk 2
Logged
Pages: [1]   Go Up
« previous next »